SUGGEST CO., LTD. / SUN JAU MACHINE IND. CO., LTD.
Vacuum forming machine
- Pages: 1
Vacuum forming machine S-13
Vacuum forming machine
This machine is fit to make various packing blister, PVC forming calendar and coating film on disposable tray. It also fit to make the Skin Packing. (Shrink a packing and seal a packing article on a cardboard.) The printing article forming which need to loading the sheet piece by piece also fit by this machine.
Vacuum forming machine S-13B
Vacuum forming machine
This machine have double heater to heating the sheet from two side of the sheet. It suitable for both thin and thickness board forming. The material loading is able to use by roll or board both.
It also fit to make decoration on soft PVC, for make the special decoration on sheet surface. Such as the cone for speaker or PVC sheet make bag, that kinds of sheet surface have some small decoration will able to make by this method also.
This machine is one cycle automatic, the production need manual to take out from the forming area.Vacuum Forming machine S-13A, S-13E
Vacuum forming machine
Applications: This machine can mass production packing blister, disposable food container, biscuit tray, ceiling and can use sheet materials of PVC, PS, ABS, PET into various kinds of boxes, cases, such as cake boxes, meal boxes, toys, food holders suitcases, auto parts, sanitary wares, etc., The S-13E have the extra function for skin packing. This machine is for the company who need to make packing blister in automatic which also need to use skin packing machine.
The advantage of this machine:
(1)Average heating on sheet: Average Heating is very important on this kinds of machine. Our machine S
(2)Lower wastage material: Our machine wastage material compare with the other company machine will less about 5%.
(3)Lower power consumption compare with the other company design. It is very important to saving this kinds not viewable cost for the long time operation this kinds of machine.Vacuum forming machine S-15
Vacuum forming machine
Vacuum forming machine S-13C
Vacuum forming machine
This machine have double heater to heating the sheet from two side of the sheet. It suitable for both thin and thickness board forming. The material loading is able to use by roll or board both.
It also fit to make decoration on soft PVC, for make the special decoration on sheet surface. Such as the cone for speaker or PVC sheet make bag, that kinds of sheet surface have some small decoration will able to make by this method also.
This machine could automatic forming the roll sheet. It also able to use board sheet to loading pieces by pieces.Vacuum forming machine S-15A
Vacuum forming machine
It fit to make various packing blister, packing container, disposable food containers, ...etc production. This machine has two stations forming area which could use two different molds with different material at the same machine working at the same time. It has about 2 set of vacuum forming machine output capacity. But only one machine heater power consumption. It is a very economic model for customer for power cost saving. It also have various special design for saving the power energy and the lower down wastage material design.
Vacuum forming machine S-13CS
Vacuum forming machine
- Pages: 1